For the ultimate sound experience at home, play it through Krix.
Feel the boom of the explosion, the whisper of a child, or the rapid wings of a bird flapping in the distance, with high definition sound made for the ultimate cinema experience.
Incorporating technology used in Krix’s internationally recognised commercial cinema speakers, the Series SX speakers and subwoofers are made for custom use in dedicated home cinemas between four and eight metres in length.
Scaled from Krix’s legendary Series X, the Series SX drivers are designed to handle high power with high sensitivity, while Krix’s proprietary waveguides ensure optimum dispersion throughout your entire home cinema space.
Available in black finish only, the SX Series speakers are designed to be heard not seen, with superior engineering and technology providing the highest level of soundtrack reproduction.
Series SX will deliver the impact and realism you expect from a cinema, without the need for expensive high-power amplifiers. With a number of mounting styles available, there is a Series SX speaker combination to suit every cinema lover’s room.
These floor standing speakers deliver the dynamics and directivity of true cinema sound.
Easy installation and high power output allow these front, surround or overhead speakers to deliver movie soundtracks and effects at full throttle.
Discrete speakers with not-so-discrete presence and power – these in wall speakers will have you wondering how a hidden speaker can sound so good.
Low frequency effects are the foundation of a great soundtrack. Hear every explosion and feel every rumble.
With a combination of extreme bass levels, smooth frequency response, and a huge dynamic range not often found in dedicated home cinema speaker systems, Krix Series X 2 way speakers provide the ultimate cinema experience, at home.Specially designed for dedicated home cinemas, Krix Series SX in room speakers feature drivers designed to handle high power with high sensitivity.
With the option to be floor standing or mounted into cabinetry, the Krix Series SX speakers allow versatility for placement anywhere in the room.
Krix’s proprietary waveguides also ensure optimum dispersion of sound throughout your home cinema space.
Designed for dedicated home cinemas, the Megaphonix In-Room delivers effortless power and controlled dispersion to achieve the impact of a real cinema experience.
Frequency range
40Hz-20kHz in room response
Power handling
50-250 Watts RMS recommended amplifier power
Sensitivity
95dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Configuration
2-way
Enclosure type
Bass reflex, front vented
Low frequency driver
Single 255mm (10”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated magnet assembly and copper shorting ring for low distortion
High frequency driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide
Crossover point
1.8kHz
Input terminals
Nickel plated spring terminals featuring a 5mm hole to accept up to 10AWG cable
Dimensions
939mm high x 315mm wide x 205mm deep
Weight
19kg each
Mounted below your screen, the Megaphonix Centre delivers high quality dialogue and effects for your ultimate movie experience.
Frequency range
40Hz-20kHz in room response
Power handling
50-250 Watts RMS recommended amplifier power
Sensitivity
95dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Configuration
2-way
Enclosure type
Bass reflex, front vented
Low frequency driver
Single 255mm (10”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated magnet assembly and copper shorting ring for low distortion
High frequency driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide
Crossover point
1.8kHz
Input terminals
Nickel plated spring terminals featuring a 5mm hole to accept up to 10AWG cable
Dimensions
285mm high x 1035mm wide x 164mm deep
Weight
15kg each
Designed specifically for dedicated home cinemas, the Series SX on wall speaker range feature exceptionally engineered drivers made to handle high power with high sensitivity.
With Krix’s proprietary waveguides ensuring optimum dispersion, Series SX on wall speakers are made for wall mounting, but are also ideal for placing behind an acoustically transparent screen, for sound that will truly move you.
The OWX-50 on-wall speaker offers performance and power in a compact design.
Frequency range
60Hz-20kHz in room response
Power handling
50-500 Watts RMS recommended amplifier power
Sensitivity
97dB for 2.83 volts at 1 metre
Impedance
4 Ohms
Configuration
2-way
Enclosure Type
Bass reflex, front vented
Cinema black with grille and bracket
Low frequency driver
Dual 165mm (6 1/2”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated spider and aluminium flux stabilisation ring for low distortion.
High frequency driver
A Krix patented, short throw constant directivity horn, coupled to a compression driver with a 1” throat 1 ¾” voice coil.
Crossover point
1.9kHz
Input terminals
Nickel plated spring terminals featuring a 5mm hole to accept up to 10AWG cable
Dimensions
440mm high x 440mm wide x 159mm deep (including grille)
447mm high x 440mm wide x 169mm deep (including bracket)
Weight
14.4kg each
The OWX-55 on-wall speaker offers performance and power in a compact design.
Frequency range
60Hz-20kHz in room response
Power handling
50-500 Watts RMS recommended amplifier power
Sensitivity
97dB for 2.83 volts at 1 metre
Impedance
4 Ohms
Configuration
2-way
Enclosure type
Bass reflex, front vented
Low frequency driver
Dual 165mm (6 1/2”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated spider and aluminium flux stabilisation ring for low distortion.
High frequency driver
A Krix patented, short throw constant directivity horn, coupled to a compression driver with a 1” throat 1 ¾” voice coil.
Crossover point
1.9kHz
Input terminals
Nickel plated spring terminals featuring a 5mm hole to accept up to 10AWG cable
Dimensions
610mm high x 361mm wide x 175mm deep (including grille)
617mm high x 361mm wide x 181mm deep (including bracket)
Weight
14kg each
With easy wall mounting, the Phonix deliver surround effects with clarity and power, putting you in the middle of the action.
Frequency range
40Hz-20kHz in room response
Power handling
50-250 Watts RMS recommended amplifier power
Sensitivity
95dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Configuration
2-way
Enclosure type
Bass reflex, front vented
Low frequency driver
Single 255mm (10”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated magnet assembly and copper shorting ring for low distortion
High frequency driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide
Crossover point
1.8kHz
Input terminals
Nickel plated spring terminals featuring a 5mm hole to accept up to 10AWG cable
Dimensions
285mm high x 1035mm wide x 164mm deep
Weight
15kg each
Installed on the wall or ceiling, the Phonix Flat deliver surround effects with clarity and power, putting you in the middle of the action.
Frequency range
45Hz-20kHz in room response
Power handling
50-150 Watts RMS recommended amplifier power
Sensitivity
88dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Configuration
2-way
Enclosure type
Bass reflex, front vented
Low frequency driver
Single 165mm (6½”) laminated polypropylene cones. 33mm (1¼”) voice coil wound on high powered aluminium former, with ventilated spider and aluminium flux stabilisation ring for low distortion
High frequency driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled
Crossover point
1.8kHz
Input terminals
Gold plated binding posts
Dimensions
388mm high x 260mm wide x 132mm deep
Weight
6kg each
Installed on the wall or ceiling, the Phonix 45 is incredibly versatile, delivering all the performance of the Phonix with an angled baffle to direct the sound to your seat.
Frequency range
45Hz-20kHz in room response
Power handling
50-150 Watts RMS recommended amplifier power
Sensitivity
88dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Configuration
2-way
Enclosure type
Bass reflex, front vented
Low frequency driver
Single 165mm (6½”) laminated polypropylene cones. 33mm (1¼”) voice coil wound on high powered aluminium former, with ventilated spider and aluminium flux stabilisation ring for low distortion
High frequency driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled
Crossover point
1.8kHz
Input terminals
High current terminals featuring 5mm hole to accept up to 10 AWG cable
Dimensions
470mm high x 276mm wide x 124mm deep (please see technical drawing for dimensions when speaker is rotated)
Weight
6kg each
The Hyperphonix 45 is a high power, high sensitivity surround and overhead speaker featuring a 45 degree baffle to deliver sound directly to your seat.
Frequency range
60Hz-20kHz in room response
Power handling
50-250 Watts RMS recommended amplifier power
Sensitivity
92dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Configuration
2-way
Enclosure type
Bass reflex, front vented
Low frequency driver
Single 165mm (6 1/2”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated spider and aluminium flux stabilisation ring for low distortion
High frequency driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 90 short throw waveguide
Crossover point
1.9kHz
Input terminals
High current terminals featuring 5mm hole to accept up to 10 AWG cable
Dimensions
470mm high x 276mm wide x 195mm/124mm deep (please see technical drawing)
Weight
6kg each
For the biggest in home cinema surround sound, look no further. Effortless power and controlled dispersion mean surround effects will be delivered with stunning accuracy, weight and detail.
Frequency range
40Hz-20kHz in room response
Power handling
50-250 Watts RMS recommended amplifier power
Sensitivity
95dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Configuration
2-way
Enclosure type
Bass reflex, top vented
Low frequency driver
Single 255mm (10”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated magnet assembly and copper shorting ring for low distortion
High frequency driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide
Crossover point
1.8kHz
Input terminals
Nickel plated spring terminals featuring a 5mm hole to accept up to 10AWG cable
Dimensions
560mm high x 390mm wide x 321mm deep at the top (171mm deep at the bottom)
Weight
15kg each
Mounted on wall as fronts or surrounds, the Megaphonix Flat delivers high quality dialogue and effects to bring you the movie soundtrack just as the director intended.
Frequency range
40Hz-20kHz in room response
Power handling
50-250 Watts RMS recommended amplifier power
Sensitivity
95dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Configuration
2-way
Enclosure type
Bass reflex, front vented
Low frequency driver
Single 255mm (10”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated magnet assembly and copper shorting ring for low distortion
High frequency driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide
Crossover point
1.8kHz
Input terminals
Nickel plated spring terminals featuring a 5mm hole to accept up to 10AWG cable
Dimensions
885mm high x 390mm wide x 162mm deep
Weight
15kg each
Specially designed for dedicated home cinemas, Krix Series SX in-wall speakers feature drivers designed to handle high power with high sensitivity.
Designed to easily mount into a wall cavity, for that discreet, uncluttered look in your home cinema. Krix’s in wall speakers will be heard with powerful clarity, but not seen.
Fitting within a standard 90mm wall cavity, the Scenix can be used as front speakers behind acoustically transparent screens or as surround speakers in a multi-channel setup.
Frequency range
80Hz-40kHz in room response
Power handling
50-150 Watts RMS recommended amplifier power
Sensitivity
91dB for 2.83 volts at 1 metre
Impedance
6 Ohms
Configuration
2-way
Enclosure type
Sealed
Low frequency drivers
Fibre reinforced polymer basket, 130mm (5¼”) doped paper cone driver, 25mm (1”) vented magnet voice coil wound on high temperature aluminium former
High frequency driver
26mm (1”) dual concentric diaphragm with waveguide centre plug for controlled directivity. Non-reflective dual chambered magnet structure with copper shorting ring to lower distortion
Crossover point
2.1kHz
Input terminals
Gold plated binding posts
Cut-out dimensions
475mm high x 300mm wide recommended
Dimensions
470mm high x 295mm wide x 97mm deep cabinet
535mm high x 360mm wide x 1.6mm thick faceplate
538mm high x 363mm wide x 13mm deep grille
Weight
10kg each
With easy installation, the Phonix In-Wall delivers surround effects with clarity and power, putting you in the middle of the action.
Frequency range
45Hz-20kHz (-10dB)
Power handling
50-150 Watts RMS recommended amplifier power
Sensitivity
88dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Configuration
2-way
Enclosure type
Bass reflex, front vented
Low frequency driver
Single 165mm (6½”) laminated polypropylene cones. 33mm (1¼”) voice coil wound on high powered aluminium former, with ventilated spider and aluminium flux stabilization ring for low distortion
High frequency driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled
Crossover point
1.8kHz
Input terminals
Gold plated binding posts
Cut-out dimensions
393mm high x 265mm wide recommended
Dimensions
388mm high x 260mm wide x 120mm deep cabinet
453mm high x 325mm wide x 1.6mm thick faceplate
Weight
7kg each
Mounted behind acoustically transparent screens or as surrounds in a multi-channel setup, the Megaphonix In-Wall deliver effortless power and controlled dispersion to achieve the impact of a real cinema experience.
Frequency range
40Hz-20kHz in room response
Power handling
50-250 Watts RMS recommended amplifier power
Sensitivity
95dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Configuration
2-way
Enclosure type
Bass reflex, front vented
Low frequency driver
Single 255mm (10”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated magnet assembly and copper shorting ring for low distortion
High frequency driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide
Crossover point
1.8kHz
Input terminals
Nickel plated spring terminals featuring a 5mm hole to accept up to 10AWG cable
Cut-out dimensions
890mm high x 395mm wide recommended
Dimensions
885mm high x 390mm wide x 150mm deep cabinet
965mm high x 470mm wide x 2mm thick faceplate
Weight
23kg each
Designed specifically for dedicated home cinema, the Krix Series SX subwoofers ensure every crescendo and sonic boom is dynamically delivered, for a true ‘being there’ feeling.
Krix Series SX subwoofers provide low frequency power and impact and are built with minimum depth for installation along a wall, behind a screen or in a false baffle wall – providing the ultimate cinema experience.
Designed to fit behind acoustically transparent screens and other shallow locations, this is one versatile subwoofer. Don’t let the ‘slim’ name fool you, this subwoofer combines enormous punch with deep extension.
Frequency range
15Hz-200Hz in room response
Amplifier power
450 Watts RMS, 900 Watts maximum instantaneous power
Output
125dB maximum SPL in room response
Inputs
Stereo line level RCA. High level binding posts
Enclosure type
Bass reflex, down firing vents
Low frequency driver
Nominal 305mm (12”) diameter paper cone driver with 50mm (2”) long throw voice coil developed for high level, low frequency reinforcement
Power on/off
Adjustable auto/always On, 12V trigger setting
Phase select
0º or 180º
Low pass filter
50Hz-200Hz or bypass
Dimensions
630mm high x 500mm wide x 309mm deep
Weight
26kg each
This low-profile, passive subwoofer will deliver formidable low frequency performance as a supporting subwoofer for an MX-5, or as a standalone subwoofer in a Series SX system.
Frequency range
30Hz-200Hz in room response
Amplifier power
200 – 350 Watts RMS recommended amplifier power
Recommended processing
High pass filter: 30Hz 24dB / Octave Butterworth
limiter: 350W (4 Ohms)
Inputs
High current spring terminals featuring a 5mm hole to accept up to 10AWG cable
Enclosure type
Bass reflex, down firing vent
Impedance
4 Ohms
Low frequency driver
Nominal 275mm (11”) diameter doped paper cone driver, 50mm (2”) voice coil wound on high powered Kapton former with vented magnet assembly
Sensitivity
90 dB SPL (2.83V / 1m)
Dimensions
700mm high x 540mm wide x 175mm deep (195mm deep with optional grille)
Weight
17 kg each
This low-profile, passive subwoofer has been designed to deliver outstanding low frequency performance as a supporting subwoofer for an MX-10, or as a standalone subwoofer in a Series SX system.
Frequency range
25Hz-200Hz in room response
Amplifier power
200 – 500 Watts RMS recommended amplifier power
Recommended processing
High pass filter: 30Hz 24dB / Octave Butterworth
limiter: 500W (4 Ohms)
Inputs
High current spring terminals featuring a 5mm hole to accept up to 10AWG cable
Enclosure type
Bass reflex, dual down-firing vents
Impedance
4 Ohms
Low frequency driver
Nominal 305mm (12”) diameter paper cone driver with 50mm (2”) long throw voice coil developed for high level, low frequency reinforcement
Sensitivity
92 dB SPL (2.83V / 1m)
Dimensions
940mm high x 540mm wide x 190mm deep (210 mm deep with optional grille)
Weight
26 kg each
The Cyclonix 15 is a low-profile, passive subwoofer that delivers high-output low frequency performance as a supporting subwoofer for an MX-20, or as a standalone subwoofer in a Series SX system.
Frequency range
25Hz-200Hz in room response
Amplifier power
200 – 1400 Watts RMS recommended amplifier power
Recommended processing
High pass filter: 25Hz 24dB / Octave Butterworth
Limiter: 1000W (8 Ohms)
Inputs
High current spring terminals featuring a 5mm hole to accept up to 10AWG cable
Enclosure type
Bass reflex, front vented
Impedance
8 Ohms
Low frequency driver
Single 380mm (15”) paper cone driver. 100mm (4”) edge-wound copper voice coil, dual spider assembly and vented magnet assembly
Sensitivity
96 dB SPL (2.83V / 1m)
Dimensions
1015mm high x 550mm wide x 270mm deep (290mm deep with optional grille)
Weight
38 kg each
Hear every on-screen rumble or explosion with the Cyclonix 18, as it recreates the lowest possible audible frequencies for the ultimate cinema experience at home.
Frequency range
25Hz-200Hz in room response
Amplifier power
200 – 1400* Watts RMS recommended amplifier power
* The use of a power amplifier with high pass filter and soft limiter function is strongly recommended on this subwoofer
Recommended processing
High pass filter: 20Hz 24dB / octave Butterworth
Limiter: 1000W (8 Ohms)
Inputs
High current spring terminals featuring a 5mm hole to accept up to 10AWG cable
Enclosure type
Bass reflex, front vented
Impedance
8 Ohms
Low frequency driver
Single 455mm (18”) paper cone driver. 100mm (4”) edge-wound copper voice coil, dual spider assembly and vented magnet assembly
Sensitivity
100 dB SPL (2.83V / 1m)
Dimensions
1215mm high x 750mm wide x 310mm deep (330mm deep with optional grille)
Weight
64kg each
For friendly advice, contact us today