+63 9458 277 515

  • Incredibly efficient for maximum output
  • Dual 18″ drivers with extra-long excursion
  • Heavily braced enclosure
  • Dual inputs for mono or dual amplifier connection

Bass doesn’t get any bigger than this. Dual 18″ drivers will ensure you experience staggering output even in the largest of rooms or auditoriums.

Krix Megacyclonix

Hear every on-screen rumble or explosion with the Megacyclonix, as it recreates the lowest possible audible frequencies at extreme sound pressure levels, for the ultimate cinema experience at home.

The Megacyclonix is a passive subwoofer that uses high excursion drivers mounted in a high quality MDF enclosure. The proprietary Krix ‘X’ brace system is used to eliminate panel resonances.

Dual giant 455mm bass drivers feature 100mm voice coils, powerful vented magnetic circuits and double spider assemblies. The optimum cooling system provides fast heat exchange and reduced thermal power compression.

The dual front-vented enclosure is tuned to achieve extreme output capabilities, resulting in an incredibly efficient subwoofer for high drive level applications, while the unit’s proprietary Krix rubber feet provide improved acoustic isolation on hard and soft floor surfaces.

A separate power amplifier is required for this subwoofer and can be connected to the LFE output of any AV processor or receiver.

For the ultimate cinema experience at home, play it through Krix.

  • Incredibly efficient for maximum output
  • Dual 18″ drivers with extra-long excursion
  • Heavily braced enclosure
  • Dual inputs for mono or dual amplifier connection

Bass doesn’t get any bigger than this. Dual 18″ drivers will ensure you experience staggering output even in the largest of rooms or auditoriums.

“The thought of confining such beasts in even a large home theatre is almost alarming“

– Audio Esoterica Magazine

Specifications

Audio

Frequency range:
20Hz-250kHz in room response

Amplifier power:
1 x 500 – 2800 Watts RMS recommended amplified power into 4 Ohms (inputs paralleled)
2 x 250 – 1400 Watts RMS recommended amplified power into 8 Ohms

Sensitivity:
106dB @ 2.83 volts at 1 metre

Output:
133dB maximum SPL in room response

Configuration:
2-way

Enclosure type:
Bass reflex, front vented

Physical

Inputs:
2 x Krix proprietary inputs, with high current spring terminals featuring an 8mm hole to accept large diameter cable

Dimensions:
1220mm high x 1070mm wide x 470mm deep

Weight:
90kg each

Electrical

Low Frequency Driver:
Dual 455mm (18”) paper cone drivers. 100mm (4”) edge-wound copper voice coil, dual spider assembly and vented magnet assembly

 

Need help to select the right ATI Amplifier for you?

For friendly advice, contact us today